PackardBell GA-8I915PM OEM motherboard problem

[Raidek]

Hello, first of all, sorry for the English ... I'm using the google translator.

I have a PackardBell GA-8I915PM OEM board. I've done some research and found it to be analogous to this: GA-8I915P-MF
I have not found information of any kind on the internet about this motherboard variant.
The components and specs are the same, but if I try a Pentium D 925 ... it won't work.
My question is if I can install the Gigabyte BIOS from GA-8I915P-MF replacing the BIOS by Packard Bell.

Thank you very much and I'm sorry again for my English.

PS: Attached images of GA-8I915PM

[shadowsports]

Greetings...

16 yr old board.

There is no way to know what's going to happen if you flash a BIOS from another OEM to your board?

Its a museum piece either way. 

 

[Raidek]

I think I'll try to get the latest BIOS from the original gigabyte board. If it works great ... And if not, then go to waste.

[dmdilks]

Don't waste your time the 915 chip-set doesn't support "D" CPU's.

Here is a link the the supported CPU's: https://www.gigabyte.com/Ajax/SupportFunction/GetCpuList?Value=31&SocketValue=377&Socket=Intel%20Socket%20775&Chipest=Intel%20915P&Type=Chipest

https://www.gigabyte.com/Support/CPU-Support

[Raidek]

 
What a silly mistake ... I did not look at the last column of the pdf table of CPUs supported by the GA-915PM-F. I only looked at the 1st column and that's why I thought it supported the pentium D.

Thanks a lot.