Questions about GIGABYTE products > Motherboards with Intel processors

Z590 UD AC No Boot. Possible ATX_12V Connectors Issue?

<< < (2/2)

Frank Rizzo:
I have now tested this in a Z590 Gaming X and I get exactly the same fault. Red LED stuck on VGA, 5 short beeps. This seems to indicate the CPU is faulty.

teknology9:
Hi,
Have a read of this forum post, see the link below:

https://www.pcspecialist.co.uk/forums/threads/5-beeps-on-startup-motherboard-red-light.67183/

teknology9

Frank Rizzo:
Yes read that one. The point about the mobo not seeing a screen attached makes sense but it did not solve my issue. Tried different monitors, different cables Dport, HDMI, VGA

I have a new processor arriving tomorrow. It's one with IGPU. Hopefully that will work and give me some evidence of what was faulty.

Frank Rizzo:
The solution to fixing GFX cards causes failure to boot is to enable CSM in the BIOS. Of course if you have the non graphics version chip like I have then this is impossible. Gigabyte could have helped out here. They could detect the F series and over-ride the VGA red LED and allow access to the BIOS.

Navigation

[0] Message Index

[*] Previous page