Official GIGABYTE Forum

Problem with "waking up" H110M-S2H board.

amron

  • 24
  • 0
Problem with "waking up" H110M-S2H board.
« on: December 02, 2023, 09:00:50 am »
I have a desktop with a H110M-S2H board and a SSD. Os is win10. When the pc is without use it goes into “sleep” mode. The problem is that when I wake it up, it starts to open the background picture, but it’s darker than the usual picture and then the display turns into totally black. The only solution is to turn it off and restart it and then it comes on normally. Any  ideas? Is it a hardware problem? In this case what would you suggest to check, or a problem with the Windows10?

shadowsports

  • 2258
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Problem with "waking up" H110M-S2H board.
« Reply #1 on: December 06, 2023, 03:17:59 pm »
Greetings,

What BIOS rev and processor are you running?

Are you using onboard graphics or a dedicated GPU?  (What brand/model)?

What display (brand/model/size, and what's it connected to?

Are you using any adapters?

Have you performed a CMOS Reset?  Does the behavior persist?
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW

amron

  • 24
  • 0
Re: Problem with "waking up" H110M-S2H board.
« Reply #2 on: December 14, 2023, 11:39:21 am »
Hi,
The bios version is F25, the cpu is G4400.
Onboard graphics.
The display is Samsung SyncMaster 203B.
No additional adapters.
No, haven't done CMOS reset.

The situation now is that after the sleep mode, I have to restart the pc three! times. on the first attempt the display is a bit dimm and sort of flashing, on the second attempt the display is totaly dark and on the third time it's coming up normally.

shadowsports

  • 2258
  • 67
  • Xbox One, Drives STI, Use QVL RAM For Best Results
    • Gigabyte US
Re: Problem with "waking up" H110M-S2H board.
« Reply #3 on: December 20, 2023, 03:01:26 pm »
Greetings,
Test with a different monitor cable.  If the behavior is the same, I'd perform a CMOS reset. 

If the issue follows, you can try another chipset and display driver.  If none of these things help, its the CPU or motherboard. 
Z390 AORUS PRO (F10) \850w, 9900K, 32GB GSkill TriZ RGB - 16-18-18-38, RTX 3080Ti FTW3 Ultra, 960 Pro_m.2, W11
Z370-HD3P (F5) \750w, 8350K, 8GB LPX 3200 - 16-18-18-38, GTX 970 FTW SC, Intel SSD, 2TB RAID1, W11
Z97X-UD5H \850w, 4790K, 32GB Vengeance, RTX 2080 FTW