Official GIGABYTE Forum

X58A-UD9

Messervy

  • 12
  • 0
X58A-UD9
« on: August 01, 2010, 05:27:44 am »
Hello !

This is my other (initialy first problem)

I had some troubles with Ati GPU and when I decided to uninstall all the drivers with driver cleaner pro, I couldn't get the board to boot.
It stopped just before Window7 logo should dissapear. I did hear the "Hello" sounds of Windows starting but other than that I was stuck on the logo screen.
I then decided to re-install the OS and I know it sounds weird, but whatever I tried in BIOS menu it just wouldn't save the changes.

Changed first boot device to CD ROM+F10+Y+Enter ----------- it kept booting from SSD.

Oddly enough I took the SSD and set up another rig (see my other thread) the system booted just fine.

-------------------------------------------------------------------------------
Model Name : GA-X58A-UD9(rev. 1.0)
--------------------------
M/B Rev : 1.0
BIOS Ver : F4e / F1
Serial No. :
Purchase Dealer :
-------------------------------------------------------------------------------
VGA Brand : ATi      Model : Ati  Sapphite 5970
CPU Brand : Intel      Model : i7 980X      Speed : 3,3
Operation System : Win 7 64-bit      SP :
Memory Brand : Geill      Type : DDR lll
Memory Size :24 GB      Speed : 13333
Power Supply : 1200 W
INTEL Core i7 980X
GA-X58A-UD9
24GB(6x4GB) Geil GV324GB 1333C9HC
CRUCIAL C300 128GB 25/128/S600
ENERMAX Revolution85+ 1250W

INTEL Core i7 960
GA-X58A-UD7
12GB(6x2GB) G.Skill F3-10666CL9T2-12GBNQ DR3
INTEL X-25-M G2 80GB 25/S300 34nm
THERMALTAKE Toughpower 1500W

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: X58A-UD9
« Reply #1 on: August 01, 2010, 10:23:10 am »
Hi and welcome to the forum. You don't mention which SSD make/model it is and which port you are using it to connect to the motherboard, so if you could answer these queries first it might make a difference. Also check that the firmware on your graphics card is the latest version as there have been instances where this causes problems.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Messervy

  • 12
  • 0
Re: X58A-UD9
« Reply #2 on: August 01, 2010, 02:39:32 pm »
Hi, thank you !

The SSD is Intel X25-M G2 80GB 25/S300 34nm ( SA2MJ080G2C1) and was connected to Sata2_0

As far as the firmware goes I don't have a clue - it was out of the box.
By the way the board BIOS behaved I deducted it was a faulty board so I packed it to be returned.
If someone comes up with a solution I'm happy to give it another try.
INTEL Core i7 980X
GA-X58A-UD9
24GB(6x4GB) Geil GV324GB 1333C9HC
CRUCIAL C300 128GB 25/128/S600
ENERMAX Revolution85+ 1250W

INTEL Core i7 960
GA-X58A-UD7
12GB(6x2GB) G.Skill F3-10666CL9T2-12GBNQ DR3
INTEL X-25-M G2 80GB 25/S300 34nm
THERMALTAKE Toughpower 1500W

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: X58A-UD9
« Reply #3 on: August 01, 2010, 02:48:28 pm »
If yhou have already arranged an RMA then you might as well go ahead with it. If hte next boared strill has the same problem at least you will know where you stand.
You can use a reporting tool like Everest or one of the many others available to find out what firmware etc yopu have on various boards.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy