p55m-UD2 not posting/no beep codes

[draco]

  here we go again

http://www.newegg.com/Product/ComboBundleDetails.aspx?ItemList=Combo.391813

theres the combo i bought

assembled everything, powered on, lights and fans turn on, hard drive spins, the DVD spins up...no post, no codes, not even a beep. nothing happens with the monitor until you power the system off, only then the monitor wakes up from sleep mode

i check all my connections, i tried using only one RAM stick, then both sticks in different slots, then the other single stick in every slot...no change

any more ideas?

[slybunda]

ur link not working.

[absic]

Correct, link is dead and says that the Combi deal is no longer available. Nice try though. 

Could you post a few more details.....

in the mean time I assume you have tried the basics.......
There is a speaker attached to the Mobo so that you can hear any POST beeps?
You have connected all the power cables to the motherboard and, if necessary the graphics card?
You have double checked that everything is seated properly in the correct slots?
Your PSU has enough power to drive the full system?

[Dark Mantis]

Yes, not a lot to go on really world's shortest post?

[muliyul]

do you have a pc speaker connected/onboard? make sure its plugged in the right pins on the mobo.
It'd help if you'd supply us with specs.