GA-P55A UD3 bios modification?

[Greed4Speed]

This is an appeal.  Would like to know how I would go about modifying my boards bios.  To be exact, I would like to alter the memory multipliers/straps, I need 1-1 or less multiplier.  I need this for a competition, I understand the risks involved, so please help.

Many thanks
G4S

[Dark Mantis]

If you enter the BIOS and go the the MIT section you can enable the memory manually and if there are any advanced settings they will be avilable by pressing Ctrl + F1. Hope this helps.

[Greed4Speed]

Thanks for your reply.

 I have changed the memory before, I go into MIT/advanced memory settings/system memory multiplier(SPD), within that there are only auto/6.0 8.0 & 10.0 to select from.  The setting 6.0 only gives me a ratio of 4-12 memory multiplier, I would like lower.  I also tried pressing Ctrl+F1 but that does nothing.

Any other suggestions please?

[Dark Mantis]

No I am afraid that if the option is not available in the BIOS then short of using a modified BIOS instead I don't know how you would do it.