GA-890GPA-UD3H. 5.1 Realtek sound problem

[hurlingo]

excuse my bad inglish please.
Buy a ga-ud3h 890gpa 2.0. Install it with a Phenom x4 945
Win7 use 32 bits. Install drivers using Xpress Install (including sound)
Connect my Logitech x-540 5.1 that has three plug.

Green: Front
Orange: center / woofer
Black: rear

I connected each connector in the corresponding color at the back of my motherboard. In Realtek panel, selection 5.1 but  the rear channels do not work.
If set to 7.1 sound all channels (including rear).
But I doubt that the sound will work accordingly.
I'm plugging everything okay? I need to configure?
I tried with the windows sound wizard, and I get the same negative results.
thanks!

[absic]

Hi there,

Have you updated Realtek Drivers for latest version as the ones on CD may be a little old now?
Download from here: http://www.gigabyte.com/products/product-page.aspx?pid=3420&dl=1#dl

[Dark Mantis]

I had a similar problem on my onboard sound and found that if I set it to 7.1 and used the side speakers instead of the rear it worked fine.

[hurlingo]

Hi there,

Have you updated Realtek Drivers for latest version as the ones on CD may be a little old now?
Download from here: http://www.gigabyte.com/products/product-page.aspx?pid=3420&dl=1#dl

thanks for the quick response!
I will try with new drivers (they are really new, they have 10 days!)
Then stop by to discuss the results
thanks

[Senios]

In order to work in the 5.1 selection i have them plugged in as side speakers.
Let us know if that is fixed with the new drivers.

[hurlingo]

In order to work in the 5.1 selection i have them plugged in as side speakers.
Let us know if that is fixed with the new drivers.

Connect the black plug (rear) in the gray connector of the mobo (side)
When the soft I wonder who had connected, select side.
Set as 5.1 and functioning properly.
thanks!

[Senios]

If i want to install the new drivers, i should uninstall the previous first, right?
also is it normal that i have both ati hdmi audio, realtek high definition audio listed in device manager?

i am using the onboard audio.

[Dark Mantis]

Yes. This is standard for the two types of output.