Official GIGABYTE Forum

EX58-UD3R does not boot(no beeps)

Re: EX58-UD3R does not boot(no beeps)
« Reply #15 on: September 11, 2010, 09:32:20 pm »
So basically you are saying that X58 chipset on the Gigabyte moptherboards wont take 12Gb of memory(or at least all slots filled)? If that is so there is a  huge problem as more people fill their boards with RAM. :o


Dark Mantis I am speechless. It would be the last thing that I would believe but I saw it happening in front of my very eyes(I was present while the repair was taking place!).

To be honest, I won't be surprised if the Asus has the same behavior after a while. Right now I am working on the specific PC and it always detects 12gb.

What can I say. It is true however that there are very few people right now stuffing their motherboard with so much RAM so the problem, although it is widespread(googling does yield many results), it is not so common to the majority of users.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: EX58-UD3R does not boot(no beeps)
« Reply #16 on: September 11, 2010, 09:46:15 pm »
The only thing that makes me sceptical is that I personally know of several people with X58 chipset motherboards(Gigabyte and admittedly X58A type but it shouldn't make any difference) that have 12Gb and are running fine. ???

Did they try the same motherboards with less memory while you were watching?
« Last Edit: September 11, 2010, 09:51:29 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: EX58-UD3R does not boot(no beeps)
« Reply #17 on: September 12, 2010, 04:52:43 pm »
IMPORTANT

As this seemed to be of significant importance I thought that I had better take some advice on it. I have conversed with the TweekTown guru Lsdmeasap and he has clarified the situation. For a start this is a problem on 1366 and to a lesser extent 1156 socket motherboards not just Gigabyte but all makes. Most of the time the issue is bent pins on the CPU socket as we have already noticed here in the forum. This is really a bad design by Intel and common to all makes.
The quotes I will introduce are all from Lsdmeasap, so a big thanks to him for his help.

Quote
This issue you mention is common with ALL 1366 motherboards, 4GB out of 6GB, or 8GB/10GB out of 12GB.   It''s usually about 65-70 % caused by bent socket pins, 20-25 incorrect QPI/Vtt - dram voltage relationship or improper uncore settings, 5-10 % faulty ram (Usually less often), and very small percentage can also be caused by uneven heatsink pressure but this isn't very often at all.

Users always blame the board, no matter the brand too, they always say this happens with all XX brand boards (Whatever they are using) like it's a brand issue.   It isn't, it's really a poor Intel design issue by putting the memory controller in the CPU with all those super tiny thin pins

Quote
I can cause it manually anytime on the fly with incorrect QPI/Dram voltage, too high/low uncore, memory frequency too high for all settings, or incorrect timings even.   Eva2000 made a NICE thread here (For Asus  ) users, explaining the MANY things that can cause this.  You'll see the "Possible Causes" list and tips right under the images

http://i4memory.com/ramdetect/


To make it easier to understand there are some included images

Quote
I have actually done a few tests in the past for people who thought the same about it being a "Gigabyte Only" issue.   I show them these results, 12GB two ways.   One way is two different sets of memory at 1600Mhz 12GB, the other is with 3 mixed sets adding a second brand in as well, with taskmanager showing ram total in each as it's the main place you can notice the problem.   It's also easy to spot in the BIOS with SPD set to Expert then look at each channel timings one by one, failed channel will show up as N/A or -


Click images to view

Quote

12GB of mixed memory @ 1600Mhz.  3 different sets mixed, all with different timings and IC's, even a second brand threw in to mix it up.  Each channel set to spec of installed memory, so this is REAL Triple channel



Quote
12GB Mixed memory @ 1600Mhz.  2 mixed sets, different timings and IC's






 *Also note, this can affect 1156 as well, Dual Channel is just not as hard on the IMC/QPI, so you don't see it as often unless there is bent pins or voltages are way off*

I hope this helps clarify the situation for anyone in this predicament and also demonstrates that this is not a Gigabyte only problem.
« Last Edit: September 13, 2010, 10:04:41 am by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: EX58-UD3R does not boot(no beeps)
« Reply #18 on: September 12, 2010, 10:10:16 pm »
Hello Dark Mantis,

Very interesting information, I have no doubt this is the case.

So, what is the solution? If we suppose that the voltages are correct, there are no bend pins what can let all those users that have this problem use all their RAM?

Is the solution going to come with future BIOS updates for their motherboards? I am an audio professional working for the music, film/tv industry for many years on PC's, and honestly, after experiencing this problem, this is the only time I have been thinking of switching to Mac.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: EX58-UD3R does not boot(no beeps)
« Reply #19 on: September 12, 2010, 10:23:15 pm »
Well from my digging and what I have been told by Lsdmeasap at least about 3/4 are bent pins and the rest are nearly all wrong QPI/Vtt, memory or uncore settings. The actual faulty memory modules that cause the problem is negligable. Obviously it has to be taken into account but as you can see the majority are by far faulty CPU sockets. As it happens this would go along with the trend that we have been looking into already on the forum but didn't realise the link. We also assumed it was a Gigabyte only problem but it can be any manufacturer. This link is relevant for the ASUS boards: http://i4memory.com/ramdetect/


I think that only a change of socket design is going to cure this problem. That is not much comfort for the likes of you and me with the 1366 socketed boards but at least we know what to look out for. Obviously a BIOS update or any other software fix is out of the question.
« Last Edit: September 12, 2010, 10:56:42 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: EX58-UD3R does not boot(no beeps)
« Reply #20 on: September 12, 2010, 11:35:26 pm »
Dark Mantis please have a look here and let us know what do you think:

http://forums.hexus.net/scan-3xs-systems-support/191257-does-asus-p6x58d-premium.html

In the last post.

This could also make sense, however,after searching, I found out that the sockets are obviously problematic.


Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: EX58-UD3R does not boot(no beeps)
« Reply #21 on: September 12, 2010, 11:46:00 pm »
Yes I would agree with what was being said there also. He was just reiterating what we have already said regarding the voltages on the ones that fail due to wrong settings. Obviously it isn't going to help those with bent pins. Actually I noticed that he said on there that the Gigabyte BIOS releases were normally better which is one of the main reasons why I moved from ASUS over to Gigabyte in the first place.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: EX58-UD3R does not boot(no beeps)
« Reply #22 on: September 13, 2010, 06:07:31 am »
If any of you guys need help with your voltages or settings to try and correct your issues let me know as I can help for sure!

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: EX58-UD3R does not boot(no beeps)
« Reply #23 on: September 13, 2010, 08:26:36 am »
If any of you guys need help with your voltages or settings to try and correct your issues let me know as I can help for sure!

I can vouch for this guy. He is very well known on the TweakTown Forum as a Gigabyte guru and can certainly help with any setting problems you might be having.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: EX58-UD3R does not boot(no beeps)
« Reply #24 on: September 13, 2010, 09:05:17 am »
This link
http://i4memory.com/ramdetect/

Is relevant for ALL X58 boards, it just happened that Eva2000 wrote it while using an Asus board, so anyone with issues should check it out for all possible causes and or solutions for this issue.