Official GIGABYTE Forum

EP45 Overclocking

EP45 Overclocking
« on: November 14, 2010, 11:56:49 am »
Is it possible to unlink the RAM with overclocking? I'm worried about overclocking my RAM, mainly because I don't think it can really handle it too well, so it would be nice to be able to just overclock the processor by itself.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: EP45 Overclocking
« Reply #1 on: November 14, 2010, 12:02:25 pm »
Hi and welcome to the Gigabyte Forum.
Yes it is possible but a few more details on your system would be useful first to make sure there is no mistakes.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: EP45 Overclocking
« Reply #2 on: November 14, 2010, 10:39:11 pm »
Hi and welcome to the Gigabyte Forum.
Yes it is possible but a few more details on your system would be useful first to make sure there is no mistakes.

Not sure what details you want, but I'll just list some off that are relevant. I have an E6750 processor, which is currently clocked at 3.4ghz, from 2.6ghz, my motherboard is an EP45 of course, I'm using a Hyper 212 Plus heatsink and my RAM is OCZ Gold PC2-6400 ram.

So how do you go about doing that? I didn't see the options for it, unless I overlooked them.
« Last Edit: November 14, 2010, 10:39:59 pm by CrazyCanuck90 »

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: EP45 Overclocking
« Reply #3 on: November 14, 2010, 11:05:55 pm »
I need your motherboard's model number (not abbreviation) and revision also what BIOS you are using.
« Last Edit: November 14, 2010, 11:07:15 pm by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: EP45 Overclocking
« Reply #4 on: November 14, 2010, 11:23:10 pm »
I need your motherboard's model number (not abbreviation) and revision also what BIOS you are using.

Full name is EP45-UD3L, revision 1.1, http://www.gigabyte.com/products/product-page.aspx?pid=3285#ov , and it has the latest BIOS.


Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: EP45 Overclocking
« Reply #5 on: November 15, 2010, 09:08:53 am »
Thanks. The latest BIOS full version is F9. Is that what you are running?

Look in your manual on page 40 and it will show you how to do what you want. See below:

(G)MCH Frequency Latch
Allows you to fix the chipset frequency at system bootup. Options for adjusting memory multiplier
below may differ according to the fixed frequency. Options are: Auto (default), 200MHz, 266MHz,
333MHz, 400MHz.

http://download.gigabyte.eu/FileList/Manual/mb_manual_ga-ep45-ud3l(r)_v1.1_e.pdf
« Last Edit: November 15, 2010, 09:16:54 am by Dark Mantis »
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Fatman

  • 523
  • 18
Re: EP45 Overclocking
« Reply #6 on: November 15, 2010, 07:39:43 pm »
2.66 to 3.4 is not a bad overclock, and I really don't think you will see a great deal of difference going any higher. However after saying that, just how high do you want to go?

Re: EP45 Overclocking
« Reply #7 on: November 15, 2010, 08:53:24 pm »
F9 is what I'm running, setting the MCH Frequency Latch to 400 doesn't seem to keep it there, it still uses the multiplier.

And to Fatman, I want to be at 3.6-3.8ghz.

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: EP45 Overclocking
« Reply #8 on: November 17, 2010, 05:19:48 pm »
You can use either B or D memory multipliers, if you leave MCH Strap at Auto.   If you set that to 333 or 400 you will only have the memory multipliers that correspond with the set strap.

Here are the straps and memory multipliers on each one

Re: EP45 Overclocking
« Reply #9 on: November 19, 2010, 03:24:08 am »
But is there a way I can have them unlinked? If my ram is even slowly overclocked(850mhz), I get blue screens.

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: EP45 Overclocking
« Reply #10 on: November 19, 2010, 05:38:03 am »
No, not on Intel, you can only use the lowest multiplier is all.

Re: EP45 Overclocking
« Reply #11 on: November 19, 2010, 02:05:09 pm »
Why is that? I was able to do it on my ASUS board that died on me.