no its on the bottom of the motherboard
Well I have heard of other people who have had a similar problem and say iot only works in the top slot. Now I cannot understand from a technical point of view why this should be but it might be worth trying anyway.
The other thing is diod you clear the tick on on the Keep DMI Data when you flashed the BIOS update? If not I would suggest trying to clear the CMOS next.
Remove the power cable from the mains supply and then press the power switch on the case for a few seconds just to drain any residual energy in the PSU capacitors.
Once done remove the motherboard battery for at least ten minutes before replacing it.
Next plug back into the mains supply and boot.
You will now need to enter the BIOS by pressing
DEL and load
Opimised BIOS Defaults.
Make any other changes to the BIOS settings to suit your self and then press
F10 to save and exit.