Official GIGABYTE Forum

1.65v RAM vs. 1.5v Ram on Sandy Bridge. I think I goofed

1.65v RAM vs. 1.5v Ram on Sandy Bridge. I think I goofed
« on: March 24, 2011, 12:17:35 am »
Hello All,

   Anyone try 1.65v RAM on their Sandy Bridge MOBO's, I know the spec sheet says 1.5V and no more that 1.58v. I have scoured the internet for an answer and I have read:  YES you can as long as you absolutely do not go over 1.65v, No you cant and follow the spec sheet, and Yes you can under volt your 1.65v RAM to 1.55 to 1.58v safely, if it runs stable at lower voltage than your good.

   I goofed  :-[, even though I triple read and double check everything ;) I still clicked buy on the wrong voltage RAM :-[

  Anyone have any better knowledge than me on this issue....I want to build this thing already instead of RMA'ing...I know- I know.... ::), better safe than sorry, but if it truly doesn't matter then...

Sincerely
The surgeon.

   

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: 1.65v RAM vs. 1.5v Ram on Sandy Bridge. I think I goofed
« Reply #1 on: March 24, 2011, 07:06:17 am »
You can use 1.65V memory just fine on P67!

I have been using 1.76-1.86V for several weeks at very high speeds without any issues.   But to answer your worries again, yes that will be fine to use.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: 1.65v RAM vs. 1.5v Ram on Sandy Bridge. I think I goofed
« Reply #2 on: March 24, 2011, 08:43:06 am »
Yes  I agree. I was under the same impression before the launch and was led to understand that the 1.65v memory wasn't any good in these boards, however it turned out to be not the case at all. At least it makes life a little more simple. 8)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Lsdmeasap

  • 1166
  • 58
    • Gigabyte Support (TweakTown USA)
Re: 1.65v RAM vs. 1.5v Ram on Sandy Bridge. I think I goofed
« Reply #3 on: March 24, 2011, 03:40:14 pm »
Ya, if there was a 1.5V or even 1.57V restriction, they would have for sure plastered stickers all over the memory slots and sockets like they did with 1366 boards and we would see warnings all over the web.   This time the 1.5v indication is just a specification like you would see 1.8V on a DDR2 board.

There is also no 0.5v correlation for memory - QPI/Vtt in these boards either

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: 1.65v RAM vs. 1.5v Ram on Sandy Bridge. I think I goofed
« Reply #4 on: March 24, 2011, 03:48:18 pm »
Yes I noticed the memory voltage was just advisory ;) However I wasn't aware of the no need for the 0.5v rule any more, thanks.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: 1.65v RAM vs. 1.5v Ram on Sandy Bridge. I think I goofed
« Reply #5 on: March 25, 2011, 12:16:27 am »
Thanks guys for the response, I feel better about it now.

It was getting frustrating to try and parse out all talk on this issue.

Sincerely,

Surg.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: 1.65v RAM vs. 1.5v Ram on Sandy Bridge. I think I goofed
« Reply #6 on: March 25, 2011, 08:06:27 am »
You are very welcome and as you see it helps all of us at times as I learnt something form Lsdmeasap there. ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy