X58A-UD5 REV. 1.0 COLD BOOT ISSUES

[incognito]

My configuration;

Mobo:Gigabyte X58A-UD5 Rev. 1.0  Bios:F7E
Cpu:Core i7 930 D0 Rev.
Cpu Cooler:Zalman CNPS10X Performa
Graphics Card:Zotac GTX 470 Amp! Edition
Ram:Gkill Pi Series 3x2 GB 1600 Mhz 6-8-6-20@1.6 V
Hdd:WD Cav.Black 2x1 TB@Raid 0+1 TB Samsung HD103SJ+500 gb Seagate+500 gb Seagate
Optical Driver:Asus 24X DRW
Monitor:Samsung 24" B2430H 1920x1080@hdmi
Chassis:Cooler Master RC 690 II Advanced
Fans:6x12 cm Akasa Viper S-Flow Fan
Fan Controller:Sunbeam Rheobus 6x Fan Controller
Psu:Hiper Type R Mark-II 880 Watt(Peak Load 1040 Watt)
Sound System:2+1 Creative I-Trigue 3600
Operating System:Windows 7 Ultimate X64


When I try to open my pc,after the windows logo flashes multiple bsod errors occurs.(Eg. irq_not less_or_equal / memory management /page in non-paged area / system inception error etc.) After a couple of minutes,when the pc warms up,it is functioning perfectly without any problems.

Cpu settings are:

turbo boost:disabled
multi threading:disabled
c1e:disabled
eist:disabled
thermal monitor:enabled

All of the voltage settings are set to auto.Can you recommend any ideas for what to do? I can't stand the blue screen and cold boot issues.I'm really thinking about to sell the mobo,cpu,ram and change my platform to LGA 1155.

[Dark Mantis]

Well it would sound like a memory problem. I have seen this type of situation before when one of the modules was faulty and worked fine once warm. Try removing all but one and rotating them to see if you can find out which one is playing up. There would probably not be any point running Memtest on them as it would come back fine.