Gigabyte D525T-UD Mini-ITX motherboard

[joesat]

Gigabyte D525T-UD Mini-ITX  did not find ddr3 800 memory anywere so have got ddr3 1600 how do i underclock them in the bios i bought     Kingston 4GB (2x2GB) DDR3 1600MHz HyperX  will these be ok on this mob                    

[Dark Mantis]

Hi and welcome to the Gigabyte Forum.

Can you check your model number please as our system isn't recognising it?

Also the revision number of your motherboard would be helpful.

[runn3R]

Hi Dark Mantis, I think joesat talks about this one:
http://uk.gigabyte.com/products/product-page.aspx?pid=3549#ov

[Dark Mantis]

Thanks runn3R. 

[Dark Mantis]

Well it will be a bit of overkill but the memory should work ok at the slower speed without any problems.

[joesat]

do i need to alter anything in the bios when  instal this memory  or will it just boot ok without ajustment thanks joesat

[Dark Mantis]

As long as the Kingston memory that you have bought is 1.5v it should just work at the 800 speed. If not you will need to adjust your settings manually in the BIOS.

[joesat]

memory was ok pity the the harddrive was DOA waiting for  ebuyer to return new one then will restart build

[Dark Mantis]

Normally Ebuyer are very good and don't keep you hanging around long. At least you got to the bottom of it.