Official GIGABYTE Forum

GA-870A-UD3 hangs in POST after loading cpu

La7gla

  • 6
  • 0
GA-870A-UD3 hangs in POST after loading cpu
« on: February 28, 2011, 01:37:50 pm »
I have the Gigabyte GA-870A-UD3. And on could boot in "post meny" its hang. A solution is to take out all usb (2) memoristick external hd. I realy dont know wath the problem is.

This is a big problem for me . I have a lot off usb hd and memoristick

Please help  :)

Amd ph2 965
Kingstone 12gb ram
corsair h50

Jan-Ivar
« Last Edit: February 28, 2011, 02:53:58 pm by absic »

jolphil

  • 114
  • 7
Re: GA-870A-UD3 hangs in POST. after loading cpu
« Reply #1 on: February 28, 2011, 01:57:10 pm »
If I read your post correctly ..The system fails to boot with the USB sticks inserted..If so did you install the latest windows driver for USB?
jolphil

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-870A-UD3 hangs in POST after loading cpu
« Reply #2 on: February 28, 2011, 09:08:15 pm »
Make sure that you have Legacy USB Devices enabled in the BIOS.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

Re: GA-870A-UD3 hangs in POST after loading cpu
« Reply #3 on: March 01, 2011, 12:52:23 pm »
My board would not boot when my iPod was plugged in to a USB socket.

I think this was because I had USB above my hard drives in the boot order, so I assume it was looking at the iPod, not finding a boot record, but then not moving on to hard drives.

Assuming you're not booting from these devices, you could try changing the boot priorities.

La7gla

  • 6
  • 0
Re: GA-870A-UD3 hangs in POST after loading cpu
« Reply #4 on: March 01, 2011, 02:17:47 pm »
I've tried to change the bot in the bios setup. Both with and without usb. No change. I also have the same problem with my ipod. I'll try Dark Mantis solusjon.

jolphil      I've downloaded the latest drivers. So I do not think the problem lies there.

jolphil

  • 114
  • 7
Re: GA-870A-UD3 hangs in POST after loading cpu
« Reply #5 on: March 01, 2011, 08:28:12 pm »
Hi,
I just noticed in your post you state you have 12 gb of RAM..Is that a typo or do you have unmatched sticks in your motherboard..
Can you clarify your RAM..
Jolphil :)

La7gla

  • 6
  • 0
Re: GA-870A-UD3 hangs in POST after loading cpu
« Reply #6 on: March 08, 2011, 02:29:03 pm »
Make sure that you have Legacy USB Devices enabled in the BIOS.

Solved :-)  Thanks


Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-870A-UD3 hangs in POST after loading cpu
« Reply #7 on: March 08, 2011, 02:36:46 pm »
Yes it is often just down to that little setting.  ;)
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy