ga-870a-ud3 AMD 965 radom BSOD

[leeosb]

Motherboard: GA-870A-UD3 Rev 2.1 with Bios ver F4
Processor: AMD Phenom X4 965 3.4G AM3
Memory: 2x G-Skill F3-10666CL9D-8GBRL
Video: NVIDIA GeForce 8400GS ddr3 1G
Harddisk: 640 Gb Western Digital Sata6
Antec Case Three Hundred Illusion
Antec 750W PS

Windows 7 Ultimate (new Install)

I keep get radom BSOD 9 10 in the last month.  The BSOD are with load and idle.   I have 16GB of ram G-Skill 1333.

Have run memtest86 (one pass on problem).

Any ideas would help...

Thanks

[Dark Mantis]

Hi and welcome to the Gigabyte Forum.

You have omitted the most important part of the information...what was the stop message on the BSOD ?

You also need to run Memtest properly for it to have any credance. One pass is nowhere near enough.

Memtest86+        http://www.memtest.org/

Insert one stick of memory in slot 1 and run Memtest on it for at least 10 loops and if there are no errors then swap it over with the next one and continue untill you have checked all  modules.
 
If you have any errors the module is faulty.

If you have any faulty modules you will have to return the whole kit as they are matched.

Post back when you have done that with the results.

[leeosb]

The BSOD:

bugcheck was: 0x000000c2 (0x0000000000000007, 0x0000000000001097, 0x0000000000000000, 0xfffffa800e32ab00)

bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff88001795dac, 0xfffff880033c2f58, 0xfffff880033c27c0)

 bugcheck was: 0x00000023 (0x00000000000e00e6, 0xfffff88003de6618, 0xfffff88003de5e80, 0xfffff88000ff0493)

 bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff880070452c0, 0x0000000000000000, 0x0000000000000000)

These are the main ones.  I will start on the memory.

[Dark Mantis]

Usually associated with driver conflicts. Try removing any hardware drivers that you have recently installed and then make sure Windows is fully updated along with any of the motherboard drivers before reinstalling the rest of the drivers. Sometimes associated with Nero.

[leeosb]

I will look at drives again.  I installed the latest motherboard drivers and video driver.  I will check the other drivers.

Also when I installed my memory I installed the first 8G in slot 1 and 2 the second set of 8G in slot 3 and 4.  Should that have been 1 and 3 for the first set and 2 and 4 for the next set.

I will unplug all of the USB devices and see what happens.

Thanks for your help