GA-880GA-UD3H Beep Codes

[KEP]

Hi --

System was just purring along, no sweat.  Then, I get a buzzing from the speakers, and absolutely no response to anything.  

I do a reset.  Beep codes.  2 long, 1 short.  Repeatedly.  (As shown in attached Audacity snapshot.)

Tried resetting the video card.  Tried just unpowering for awhile, and resting.  

All the fans, drives, led's, and so on seem to be going. 

No video whatsoever, so can't get into BIOS.

Not sure what to try next, so here I am.  

Any thoughts?

Thanks...

[KEP]

Proving the age-old internet truism - Ask and it shall come to you!

I yanked one of the memory modules, powered up, and no beeps.

Pulled the other one, stuck the first one I pulled into its place, powered up, beeps returned.

Replaced the one that didn't beep into the first socket, and I'm back in business.  At least partially.

I'm not very happy that the beep code I got is apparently undoc'd.

But, what matters now is I gotta go after G.Skill...   

[Dark Mantis]

Congratulations! on not being a Newbie any more.

Sometimes we do find beep codes that don't seem to fit in with any usual set of known beeps. That's what adds to the fun 

[j2o]

hi look the back of the book ! grafics or monitor error  . i had 2+6 beeps which was ram . hope that helps

[Dark Mantis]

hi look the back of the book ! grafics or monitor error  . i had 2+6 beeps which was ram . hope that helps

No that is 1 long and 2 short for graphics or monitor error.

There are various odd codes that seem to crop up and often mean memory.

[KEP]

Yeah, I did find a semi-officious-appearing page somewhere that said anything other than the doc'd codes pointed at RAM.

Anyway, I'm pretty darn certain it's the RAM.  I pulled one stick, and it booted right up.  Replaced the remaining stick with the one I'd pulled, and the beeps came back.  I'm RMAing the RAM.  So far, G.Skill has been very understanding. 

[Dark Mantis]

Well good luck and let us know how you get on.