Official GIGABYTE Forum

LAN fails to resume from sleep GA-H55-UD3H

aiello

  • 3
  • 0
LAN fails to resume from sleep GA-H55-UD3H
« on: June 06, 2011, 07:28:55 pm »
I have built an HTPC with a GA-H55-UD3H motherboard and core i3-540 cpu, Win7 64-bit, onchip video.  Very unusual problem, after resume from a sleep state of longer than 12hrs, the LAN does NOT resume.  A reboot is required.  If the sleep state is less than 4 hrs, the system resumes normally and all is well.

I do have an overnight backup process running from a windows home server, but have tested around this possibility, and it is not the source of the problem.  I have also unchecked the LAN driver property to allow the system to disable in the power management tab.

Any thoughts?

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: LAN fails to resume from sleep GA-H55-UD3H
« Reply #1 on: June 06, 2011, 08:49:39 pm »
Hi

You don't give us a lot of information about your system but if there is a newer BIOS I would suggest updating yours.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

aiello

  • 3
  • 0
Re: LAN fails to resume from sleep GA-H55-UD3H
« Reply #2 on: June 07, 2011, 06:47:27 am »
Let me try to detail more on the configuration.  Latest bios installed F10.  All latest drivers as per Gigabyte website, no other drivers installed.  I do have Windows Home Server connector software and backups running normaly.  No video card, using on-chip video and HDMI out to plasma TV/AV receiver.  4 GB memory with 2 2GB sticks.  Single SATA HD of 320GB.  Single BluRay reader SATA drive.  550W PSU.  The only other software installed besides the OS is Acrobat Reader and ArcSoft Total Media Theater for BluRay playback.

Thanks