EP45T UD3LR bios detecting 1.6v???

[pc2008]

Hi.
It was always my understanding that, unless you were overclocking, you should run memory at stock speed.
I installed a new GA-EP45T-UD3LR board which is compatible of dram 1.5v motherboard and corsair xms3 DDR3 1333 memory which is supposed to run at default 1.5v but the PC Health Status page in the bios says the vdimm is 1.6v. In windows, Everest Computer Diagnostics & Network Audits Software is also saying that the vdimm is 1.6v. I am using the latest F10 bios and all values are on auto. Neither the CPU nor the GPU are overclocked.


my main concern was why mother board is detecting 1.5 ram as 1.6v in auto???

[Dark Mantis]

Hi


Are you sure it is not just your software that is reporting them wrongly ? Have you got the latest versions of the programs ?

[pc2008]

iam checking these settings in BIOS

[Dark Mantis]

In that case see if there is a BIOS update available as it could be malfunctioning slghtly.

[pc2008]

I am using the latest F10 bios and all values are on auto

[pc2008]

 i have to change it to normal from auto to set the 1.500v
its giving 1.6v in auto and 1.5v in normal


whats the diff between auto or normal in bios

[pc2008]

 reply..