GA-990FXA-UD3 - Pc weird freezing! Help!

[vothros]

So I changed GPU, i changed PSU and the problem remains......what now? 

[teknology9]

Hello,
Have you got another monitor you could use to double check? The latest drivers are 11.8, I suppose you could check that on the XFX website and / or check the refresh rate for the monitor. These are possibilities but the Moderators will probably correct me!!!!

Thanks

[vothros]

Yes i have the latest drivers. I changed monitor also (i didn't buy new one because of this). So what to think now? I am so disappointed cause it's my new pc..... 

[absic]

Hi again,

OK, let's go back a little bit.

Having just re-read the whole thread and double checking the RAM you are using, I would like to look at your RAM settings again.

The Kingston modules you have need to be run at a higher voltage than the motherboard will set at default so, could you reset the DRAM voltage from AUTO (which will probably be 1.5V ) to 1.65V. When you unlock the System Voltage control you will get a red Over Volt warning message, you can safely ignore this.

[vothros]

Hello and thanks for replying.
When i took it from the service, they had put the voltage to 1.65v.
I was ok till after 5 days after of using my pc started again.I put the voltage back to Auto in case it was the problem.
It did it again. Just now, i returned my pc back to the shop.
The technician will see it again but i doubt if my problem will be solved. I don't know what to think what is the problem.
The GPU again? Ram problem? Cpu? The Gigabyte motherboard? Maybe a BIOS update would solve the problem?  I really don't know what to think.
I thought my problem would be solved with the change of the GPU and PSU but still remains.....what to say....i am out of ideas....   

[absic]

Well, hopefully the shop will be able to find the fault and cure it for you.

Please let us know how you get on.

[vothros]

I will reply again when i will have it. Thanks once again for your support.

[TheNoof]

Is there any update?  I am having the exact same problem.  (see my other post)

http://forum.giga-byte.co.uk/index.php/topic,6736.0.html

--The Noof--
Ottawa, Ontario
Canada

[vothros]

Well, it was again the graphics card and they suggested me (from the shop) to change another model. So, from ATI i went to NVIDIA, 4 days i have it now working properly and hope to stay like this!! I guess the specific graphics card is problematic.