Official GIGABYTE Forum

z68x-ud7-b3 Problems with PCI slots in SLI

lev

  • 6
  • 0
Re: z68x-ud7-b3 Problems with PCI slots in SLI
« Reply #15 on: August 23, 2011, 12:27:37 am »
They both work.  They also both work in the 2 16 slots in sli.  Tech support finally told me that the configuration should work.  But nothing I try will show the card in that slot.  I guess I will RMA it and see if I have better luck.

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: z68x-ud7-b3 Problems with PCI slots in SLI
« Reply #16 on: August 23, 2011, 07:47:49 am »
Sounds like a faulty board then. I agree, try going down the RMA route and hopefully with a new motherboard the card will be seen properly. Do m ake sure that they understand why it is being returned for RMA though as otherwise you are likely to get the same one back and find that they just tested it and found it was working! I should put a note in with the motherboard specifying the fault.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy