This BIOS don`t work. Wright "Missing Checksum"
Hi dev013,
as noted above,I suspect that BIOS is not for your board.
So,I try to make modified same BIOS Ua4 for your board ( Z68AP-D3 rev.2 ):
http://www.mediafire.com/?4g5d463do9xtfc2If you successfully flashed,BIOS,CPU-Z,ET6 and another software will show Z68P-DS3 Rev 2.0,
so next new BIOS for your board will correct this.
Edit:
You
MUST use FLASHEFI included in the file and type proper commands in DOS with Bootable USB Flash Drive to flash.
May need to use /Z or /X switches still, sometimes had to use with SPIFlash (Letter case matters too, so may need to try /Z or /z, ect).
http://forums.tweaktown.com/gigabyte/27576-bios-flashing-how-qflash-guide.htmlThis special FLASHEFI is for all Z68 motherboards,to be flashed with AMI BIOS,as all will get new BIOS ID code.
Good luck!