Login
Register
×
Close
Login
Remember me
Toggle navigation
Official GIGABYTE Forum
Home
Help
Login
Register
Official GIGABYTE Forum
Questions about GIGABYTE products
Motherboards with AMD processors
No post / No power to Bios
« previous
next »
+
Print
Pages:
1
[
2
]
Go Down
No post / No power to Bios
Dark Mantis
18405
414
10typesofpeopleoneswhoknow binaryandoneswhodont
Re: No post / No power to Bios
«
Reply #15 on:
March 30, 2012, 04:18:25 pm »
Hi
I don't know which is likely to be the more accurate out of the two so I would suggest trying some others and see what the general concensus is. Also check in the BIOS as that tends to be accurate normally.
«
Last Edit: March 30, 2012, 04:18:56 pm by Dark Mantis
»
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932
Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy
pantz
46
0
Re: No post / No power to Bios
«
Reply #16 on:
March 30, 2012, 04:55:33 pm »
Hello again, well i manually brought the CPU voltage down from 1.375v to 1.350v, and the BIOS is seeing 1.350v ( in red font) so i believe the CPUZ readings is the correct one. so is VID and CPU core voltage the same thing ?.
Thanks in advance.
Logged
Dark Mantis
18405
414
10typesofpeopleoneswhoknow binaryandoneswhodont
Re: No post / No power to Bios
«
Reply #17 on:
March 30, 2012, 05:02:59 pm »
Correct.
Logged
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932
Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy
pantz
46
0
Re: No post / No power to Bios
«
Reply #18 on:
April 01, 2012, 08:49:48 pm »
Hello again, well i did a short two hour stability test ( during my nap lol) with AIDA64. with a room temp of 25C,
http://s567.photobucket.com/albums/ss118/Pantzdown/?action=view¤t=stabilitytest.png
i was able to get a pretty decent OC'ing of 3716 at full load @ 1.350v for the two hour test. not to shabby i think.
here are the final results
i am not even going to try to get to 4.0Ghz, but i would like to possible run at 3.8Ghz.
I think i will be able to get to 3.8Ghz if i was to lower my CPU voltage to 1.300v, and a X19 multiplier, by the looks of my temps, i believe i do have a little head room to try the 3.8Ghz
Logged
pantz
46
0
Re: No post / No power to Bios
«
Reply #19 on:
April 06, 2012, 10:41:20 am »
Hello Everyone, Well i have Reached my optimal setting for my Machine, and i think i still have some headroom to go a little further is i choose,
http://valid.canardpc.com/show_oc.php?id=2317556
http://www.techpowerup.com/gpuz/3uqrh/
Logged
+
Print
Pages:
1
[
2
]
Go Up
« previous
next »
Official GIGABYTE Forum
Questions about GIGABYTE products
Motherboards with AMD processors
No post / No power to Bios