Official GIGABYTE Forum

EP45-UD3P Power up question

ak2000

  • 2
  • 0
    • Alpha Prime Communications
EP45-UD3P Power up question
« on: November 22, 2009, 05:52:14 am »
Hello everyone, new member here, but not new to Gigabyte Mobos. I have three different PCs with GB boards, but I have a question on one:
When I press the power button on my PC, I get 4 "starts" then POST just fine. It appears that the power on trys 4 times then catches. Hard to explain, but this is something I am not used to. PC boots up and runs just fine, just the strange power up has me concerned. Any ideas? Thanks
EP45-UD3P-Ver. 1.6-BIOS FC/Q8400
Corsair CM2X2048-6400C5 (2X2G)
HIS HD2600XT
Pioneer BDC-202
Plextor PX-880SA
M-Audio Delta 2496
Hauppauge HVR-1600
WDC WD1500HLFS (OS DRIVE)
AMCC 9650SE-8LPML W/5 WDC WD7500AYYS (RAID5 Storage array)
PC Power & Cooling S75QB 750W
+5V=30A +12V=60A +3.3V=24A

Pottypete

  • 686
  • 15
Re: EP45-UD3P Power up question
« Reply #1 on: November 22, 2009, 12:57:51 pm »
Hi,
Have you the latest bios
Try unplugging all your usb devices
Have you got your Boot drive set in bios
Cheers

ak2000

  • 2
  • 0
    • Alpha Prime Communications
Re: EP45-UD3P Power up question
« Reply #2 on: November 23, 2009, 01:55:39 am »
I have the latest BIOS, FC. Flashed it before I posted this. Didn't change the strange startup behavior.
Boot drive is set as the First Boot drive in BIOS.
I was thinking that it might be the usb devices. I had a MSI Mobo that would beep X amount of times before starting up indicating the USB devices plugged in.
EP45-UD3P-Ver. 1.6-BIOS FC/Q8400
Corsair CM2X2048-6400C5 (2X2G)
HIS HD2600XT
Pioneer BDC-202
Plextor PX-880SA
M-Audio Delta 2496
Hauppauge HVR-1600
WDC WD1500HLFS (OS DRIVE)
AMCC 9650SE-8LPML W/5 WDC WD7500AYYS (RAID5 Storage array)
PC Power & Cooling S75QB 750W
+5V=30A +12V=60A +3.3V=24A

oggmonster

  • 659
  • 18
  • I can see Russia from my house
Re: EP45-UD3P Power up question
« Reply #3 on: November 23, 2009, 09:47:54 am »
Have you tried running with bare minimum - no optical drives, front usb etc. Just CPU, 1 stick RAM and graphics card of some description. Obviously all power connections aswell. Then see if it will post straight away. You may also want to consider running a memtest http://memtest.org/#downiso download and mount the ISO using nero or similar program. Then set your boot device priority to boot from cd. Sometimes dodgey memory can cause this.
There's no place like ::1