Hi,
I've purchased first motherboard 870a USB3l and appeared it was faulty - occasional freezes etc... Then I replaced it with USB3 (no L) mobo and it's more stable, but still have problems with booting and stability if I have network card in either of PCIE 1x slots.
In this case I mostly don't get first beep (both slots), if I do, then PC freezes after some time (on lower slot).. Also network card doesn't work when everything seems ok. I've taken it out and it works in another WinXP computer normally. When I put it back, problems appear. Same behaviour was also with previous motherboard regarding this matter. At that time I've tried another PS, another memory, nothing helped...
Now I see same problems on new motherboard. Card is PCIE Gigabit card from STLabs :
http://www.mimovrste.com/artikel/2530020618/gigabitna-mrezna-kartica-st-lab-pci-e-x1Specs:
- BIOS F4
- CPU II X2 260 BOX
- Kingston DDR3 4GB PC1333
- GEForce 210 on PCIE x16 slot
- PCIE 4x slot is free
Any advice what to do and what to try ?
Thanks in advance,
regards,
Bulek.