Official GIGABYTE Forum

GA-8I945pm-rh motherboard

GA-8I945pm-rh motherboard
« on: April 13, 2012, 07:23:00 pm »
I have been searching for the correct drivers for the GA-8I945PM-RH motherboard for over a week.  I contacted Gigabyte to see if they had any suggestions.  They said try the 8I945P drivers but they didnt work either.  I would really like to get this board up and running so if there are any suggestions as to what to do next, they would be highly appreciated.

Gloup_Gloup

  • 982
  • 33
  • Let us sweet between members, on the forum.
Re: GA-8I945pm-rh motherboard
« Reply #1 on: April 13, 2012, 10:18:18 pm »
« Last Edit: April 13, 2012, 10:20:18 pm by Gloup_Gloup »

Re: GA-8I945pm-rh motherboard
« Reply #2 on: May 08, 2012, 11:17:37 am »
Hello,

An other question about GA-8I945PM-RH . . . I have 2 memory 512Mb in slots 1 and 3 . . . what's possibility about growing the memory on my card ? is it possible to have 2 Go (so buying 2 DDR2 of 512Mb ? or one of 1Go) .... what's about product clip memory ???

thank's

Dark Mantis

  • *
  • 18405
  • 414
  • 10typesofpeopleoneswhoknow binaryandoneswhodont
    • Dark Mantis
Re: GA-8I945pm-rh motherboard
« Reply #3 on: May 08, 2012, 01:35:05 pm »
Hi

Each slot will take a maximum module of 1GB giving a total of 4GB on the motherboard. Make sure that you purchase memory that is compatible and to be safe all the same.
Gigabyte X58A-UD7
i7 920
Dominators 1600 x6 12GB
6970 2GB
HX850
256GB SSD, Sam 1TB, WDB320GB
Blu-Ray
HAF 932

Gigabyte Z68X-UD5-B3
i7 3770K
Vengeance 1600 16GB
6950 2GB
HCP1200W
Revo Drive x2, 1.5TB WDB RAID0
16x DLRW
StrikeX S7
Full water cooling
3 x 27" Iiy

ady88s

  • 1
  • 0
Re: GA-8I945pm-rh motherboard
« Reply #4 on: October 22, 2012, 01:27:36 pm »
Hi All,

I'm new to changing hardware and am thinking about upgrading the hard drive on a PC.

The motherboard is a GA-8I945pm-rh, but I'm not sure what hard drive I can get. Will any sata drive do?

Can anyone suggest a model that would work in terms of sizes and which is least hassle as I am not very techie!

My current hard drive is a Barracuda 7200.7 / Seagate / 160GB.

I'd like to get something at least 500GB, but not necessarily any larger than this.

Thanks in advance
« Last Edit: October 22, 2012, 01:45:46 pm by ady88s »