Recent Posts

71

Motherboards with Intel processors / Z790 UD - where's the MCE (multi-core enhancement) setting in BIOS?

« Last post by XLR on November 13, 2023, 03:00:34 am »

Is it possible to disable MCE and set P1/P2 power limits to match Intel's official specs for 13900K, instead of unlimited?

Can't find any of those settings in two latest BIOS versions... Maybe they appear under different names?

72

Motherboards with AMD processors / Re: Sound problem X670E Motherboard when Manual Fan profile used

« Last post by shadowsports on November 11, 2023, 03:19:49 pm »

GCC installed an update to the AMD Chipset today...the problem seems to have gone away.

Helpful info.  I use standard profiles, so have never experienced this. 

73

Motherboards with AMD processors / Re: Custom BIOS for GA-990FXA-UD3 rev 4.0 (NVME Support)

« Last post by shadowsports on November 11, 2023, 03:17:30 pm »

The link appears to be dead or abandoned. 

10 yr old hardware.   Its time for an upgrade 

74

Motherboards with AMD processors / Re: Sound problem X670E Motherboard when Manual Fan profile used

« Last post by Bobins on November 06, 2023, 09:08:17 pm »

GCC installed an update to the AMD Chipset today...the problem seems to have gone away.

75

Motherboards with AMD processors / Sound problem X670E Motherboard when Manual Fan profile used

« Last post by Bobins on November 01, 2023, 11:34:17 pm »

Aorus X670E motherboard with latest Bios. (F13D). Not overclocked.
When playing any media content, the sound is punctuated with a loud Buzzing noise at about 5 second intervals.
After a lot of frustrating testing (checking all software is up to date etc), I've discovered that this problem occurs when any manual Fan speed profile is selected in either the BIOS or using GCC.
The only way to get normal sound is to set the fans to one of the predefined profiles.
Is this a BIOS issue?

76

Motherboards with AMD processors / Re: Custom BIOS for GA-990FXA-UD3 rev 4.0 (NVME Support)

« Last post by mtiller on October 31, 2023, 05:33:47 pm »

I get

404. That’s an error. The requested URL was not found on this server

77

Other questions about GIGABYTE / Re: USB not recognized

« Last post by shadowsports on October 27, 2023, 02:21:17 pm »

This is device enumeration, not an error. 

Try deleting the USB ports and hub from device manager.  Then restart.  You can also try updating your chipset drivers.

78

Other questions about GIGABYTE / USB not recognized

« Last post by jrjetta on October 20, 2023, 01:22:25 am »

GA-Z690. usb not recognized, USB view log shows Port_#0004.Hub_#0003. What is that trying to tell me?

79

Motherboards with Intel processors / Re: Gigabyte motherboard not starting up properly

« Last post by shadowsports on October 17, 2023, 02:41:43 pm »

Hi

I have Gigabyte motherboard Z390 UD V2, the only happening when trying to power up pc is Case fans spinning 1 lap.
after about 30 secs rgb memory sticks light up. Nothing more happens.
I have tried different memory, different casing. No change.
Havent change cpu or Psu though. But cpu pins look ok.

Any idea what can be wrong here?

Best regards
Hakan

Greetings,
Some questions for you. 

Please provide your full system specs, including disks, PSU, etc.  What's installed, attached and where, etc.   

What CPU are you using (specifically)?
What Memory (Brand, model, spec)? you said you tried more than one kind??
What BIOS rev are you running?

Have you tried Clearing the CMOS [CLR_CMOS]?
Have you seen any error LEDs? (Lower right corner) CPU, VGA, DRAM, BOOT

"1 lap"  What does this mean exactly?

Manual:
https://download.gigabyte.com/FileList/Manual/mb_manual_z390-ud-v2_e.pdf?v=d0c0d71f3deeb06229e5c709825da79a

80

Motherboards with Intel processors / Gigabyte motherboard not starting up properly

« Last post by hakbul on October 16, 2023, 01:24:07 pm »

Hi

I have Gigabyte motherboard Z390 UD V2, the only happening when trying to power up pc is Case fans spinning 1 lap.
after about 30 secs rgb memory sticks light up. Nothing more happens.
I have tried different memory, different casing. No change.
Havent change cpu or Psu though. But cpu pins look ok.

Any idea what can be wrong here?

Best regards
Hakan