Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: hakbul on October 16, 2023, 01:24:07 pm

Title: Gigabyte motherboard not starting up properly
Post by: hakbul on October 16, 2023, 01:24:07 pm

Hi

I have Gigabyte motherboard Z390 UD V2, the only happening when trying to power up pc is Case fans spinning 1 lap.
after about 30 secs rgb memory sticks light up. Nothing more happens.
I have tried different memory, different casing. No change.
Havent change cpu or Psu though. But cpu pins look ok.

Any idea what can be wrong here?

Best regards
Hakan

Title: Re: Gigabyte motherboard not starting up properly
Post by: shadowsports on October 17, 2023, 02:41:43 pm

Quote from: hakbul on October 16, 2023, 01:24:07 pm

Hi

I have Gigabyte motherboard Z390 UD V2, the only happening when trying to power up pc is Case fans spinning 1 lap.
after about 30 secs rgb memory sticks light up. Nothing more happens.
I have tried different memory, different casing. No change.
Havent change cpu or Psu though. But cpu pins look ok.

Any idea what can be wrong here?

Best regards
Hakan

Greetings,
Some questions for you. 

Please provide your full system specs, including disks, PSU, etc.  What's installed, attached and where, etc.   

What CPU are you using (specifically)?
What Memory (Brand, model, spec)? you said you tried more than one kind??
What BIOS rev are you running?

Have you tried Clearing the CMOS [CLR_CMOS]?
Have you seen any error LEDs? (Lower right corner) CPU, VGA, DRAM, BOOT

"1 lap"???  What does this mean exactly?

Manual:
https://download.gigabyte.com/FileList/Manual/mb_manual_z390-ud-v2_e.pdf?v=d0c0d71f3deeb06229e5c709825da79a