Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: scribble on April 26, 2016, 02:48:23 pm
-
I cant change many bios setting like cpu vcore or cpu multiplier and a host of others. They just say auto and when I hit enter to change the value nothing happens. My cpu is 6600k.
-
Unlocked CPU. What brand of RAM and speed are you using? Are you using an XMP profile? Have you tried clearing the CMOS, or battery pull and setting up the BIOS again?
-
My Ram is 16gb G.Skill Trident-Z DDR4-3600 (PC4-28800) CL17-18-18-38 1.35 Volt. Not using xmp. I cleared CMOS and still having the same issue.
-
Hello,
Highlight the field, don't press enter.
Instead type the value you would like then press enter.
So CPU ratio for example,
highlight field
type: 35
Press enter.
Should work like that?
-
Hello,
Highlight the field, don't press enter.
Instead type the value you would like then press enter.
So CPU ratio for example,
highlight field
type: 35
Press enter.
Should work like that?
Ha, it worked! Now I feel stupid. Thank you sir. You are both a gentleman and a scholar.
-
Na, give credit to Electro for that one... ;)