Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: jackriper on June 07, 2008, 05:00:10 pm
-
Iam can not stable memory with all seri DDR2 PC8500 (1066 mhz) more.
Iam test with OCZ DDR2 Reaper X PC8500 , OCZ DDR2 FLEX II pc9200 (1150 MHZ) ,Crucial Ballistix Tracer 2X2g PC8500 1066 ,Corsair 4096MB (4 x 1024MB) PC2-8500 1066Mhz DDR2 RAM - 5-5-5-15 - Dominator.
Iam using memtest 86 (dos ), memtest (windown) and pcmark2008 test memory :
- Pass Bus 800 (all cas 4 & 5) memory multy :4 but over 860 mhz fail
- Memory multiplier 3.33 /3.1 / 3 / 2.5 /2.4 /2 fail all test with memtest86 ,memtest ,and pcmark 2005 (memory test)
my setting : 5-5-5-18 advanced timing all auto (vdim ok)
Please test your produc with any DDr2 4g pc 8500 + and help me fix prolem or fix in next bios
Thank You.
Motherboar EP35 ds3p
Cpu E8 seri
Graphice Nvidia 8800GT
PSU Silverton 550w
Windown vista ultimas 32 bit
-
Hi
What is your bios version?
The latest one is F6:
http://www.giga-byte.co.uk/products/product-page.aspx?pid=2742#dl
We have tested following memory modules:
http://download.gigabyte.eu/FileList/Memory/motherboard_memory_ga-ep35-ds3p_2.1.pdf
-
Set Performance Enhance on standard.
Then for 4GB be sure you set your ram voltage manually, and increase the NB / MCH Voltage to +0.2-0.3
Also, until you get stable, set both channels tRD (Static tRead Value) to 8-9, you can try to lower later to 6-7