Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Gooday on July 01, 2009, 09:37:23 am
-
Hi, runn3R
I have a board GA-MA790x-UD4P reversion 1, with the latest F5 Bios , but unable to choose between Ganged mode and unganged mode in MIT after hit control+F1, any reason and how to fix it ?
Thank You.
-
Hi Gooday
What kind of CPU do you use?
How many pieces of memory sticks you have and in which slots are installed ?
Do you see "DCT mode" function under M.I.T. and if yes then what option?
-
Thank You, runn3R
Here is my spec
CPU Phenom II x3 720 Black edition
Ram Corsair CM2x1024-6400C4 1Gx4 = 4G
Display card Ati X1950 pro x 2 in Cross-Fire mode
Yes, I have that DCTs mode appeared in BIOS , I can choose unganged mode and ganged mode in BIOS, BUT the problem is, after I hit F10 and yes to restart the machine, still unganged mode , NOT CHANGE in POST and CPU-Z in windows.
-
We have tested 2 or 4 pcs of memory and set in bios as ganged then POST screen also shows ganged.
When installed 1 or 3 pcs of memory and set in bios as ganged then POST shows as unganged.
Please check you memory, try what happens when only 2 pcs installed, try to change into other memory vendor.