Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: CarlK on October 28, 2009, 02:47:11 pm
-
Hi,
I am running XP SP3 and a E6750 2GB RAM, my main audio is optical out to a Bose system. My antec Sonata case has a front panel audio connections lined to a (2x5) connector that I have plugged into the F_Panel audio header on the MB. When I try and plug a headset with microphone into the front panel nothing happens. If I try this on the rear connections the audio pop up acknowledges a connection (that is how I have it configured) and the headset works fine. When I try from the front nothing!!! I have verified the configuration to enable front panel jack detection and mute rear panel when front is plugged in (actually I have tried all combinations). I have even looked in the bios to see if there was something that enables this connection on the MB.
Any help would be appreciated.
Carl
-
hi, probably your case has ac'97 audio pin standard while mobo has hd audio
try this link:
http://forum.giga-byte.co.uk/index.php/topic,421.0.html