Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Gamer1291 on July 21, 2010, 05:38:11 pm
-
Hi everyone i am new to gigabyte just bought my pc with these specs
1.Amd Phenom II x4 965 C3
2.Gskill 2x2 4gb dual channel ram
3.sapphire radeon 4890 1 gb
I am having fun with this new rig all my games are running awesome but only one thing troubles me.
I am having trouble setting dual channel ram right now i am running both 2 gb rams in single channel they work fine no problems but how do i put them in dual channel?.
I tried putting both rams in same color slots but when i start my pc i get 3 long beeps but wen i put both ram in slots 1 and 3 it works fine but single channel.
Is dual channel really better than single channel will i get increased performance in games?
Thank you for your help
-
I think that you may have problems running with dual channel and that processor. I have just recently learnt that it can cause problems if you don't downgrade the memory.
I am sure absic will be along to clarify this for you.
-
Hi there,
could you post full details of the G skill memory that you are using especially speed, voltage etc.?
Have you made any chagnes to your BIOS settings?
Getting memory to play happily with the Phenom ii CPU's can sometimes be a bit of a challenge, whatever make of motherboard you are using, so please don't expect a quick fix.
-
Hi there,
could you post full details of the G skill memory that you are using especially speed, voltage etc.?
Have you made any chagnes to your BIOS settings?
Getting memory to play happily with the Phenom ii CPU's can sometimes be a bit of a challenge, whatever make of motherboard you are using, so please don't expect a quick fix.
Ok here is my ram specs
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231193
And no i didnt made any changes to bios or overclocking all are in stock settings
-
Hi,
First the "good" news and other interested parties please note; your memory is on the QVList so according to Gigabyte it should work.
Enabling Dual channel mode should be done automatically by the Motherboard when you install your RAM into the slots of the same colour.
Have you tried using your RAM in slots 2&4?
Have you tried running with both sticks in the white slots?
Have you tried running with both sticks in the blue slots?
From what you said before I think that you have and that it didn't work but just double checking.
What is your BIOS version?
If it is F1 you might find flashing to F2 will help. (There is F3D available but it is beta so I wouldn't go to that)
If you have tried all the above combinations and the system still won't boot in Dual Channel Mode then I would suggest RMA'ing the Motherboard.
-
Hi,
First the "good" news and other interested parties please note; your memory is on the QVList so according to Gigabyte it should work.
Enabling Dual channel mode should be done automatically by the Motherboard when you install your RAM into the slots of the same colour.
Have you tried using your RAM in slots 2&4?
Have you tried running with both sticks in the white slots?
Have you tried running with both sticks in the blue slots?
From what you said before I think that you have and that it didn't work but just double checking.
What is your BIOS version?
If it is F1 you might find flashing to F2 will help. (There is F3D available but it is beta so I wouldn't go to that)
If you have tried all the above combinations and the system still won't boot in Dual Channel Mode then I would suggest RMA'ing the Motherboard.
Yea i tried putting my ram on other slots like 2 and 4 but still i get 3 long beeps when i boot my pc.
I tried putting both ram in whitel and blue but still get 3 long beeps.
No i updated my bios to F2 still 3 long beeps the only working placement of my rams ins 1 and 3 only these two slots accept my ram without a problem.
I even tried using just one ram on 2 and 4 slot still it gives 3 long beeps with single ram.
I think it is a slot problem the slot 2 and 4 are not at all accepting my ram only 1 and 3 are accepting.
Is there no other solution other than RMAing the motherboard.?
-
Is there no other solution other than RMAing the motherboard.?
Not that I can think of.
You have tried putting memory into all of the slots and slots 2&4 won't even accept a single stick. So to be totally honest, with the problems that you are describing, I would RMA the board, as it isn't working the way that it should.