Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Lotuzz on August 22, 2012, 02:25:23 pm
-
Hello,
My mb has a normal harddisk connected on a blue sata connector, which is set on IDE in bios.
I installed a SSD (Samsung 830 128gig) on the white sata connector. But i want to put the ssd on AHCI.
I can only find one sata setting in the bios which let me select between IDE, Raid 0 or AHCI.
The plan is to boot from the SSD where i will install my OS on.
PLease help!!