Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: tabs78 on April 17, 2020, 01:02:55 pm
-
hi, sorry for my english.
i have a mb b450m aorus
crucial balistic sport 3000 8x2
ssd crucial mx500 240gb
xfx rx570
psu kolink modular 500w
ryzen 1600af
when i leave it some time (about 2h) without touch it crashes.
no signal comes to monitor.
i see on motherboard the led (ram/cpu/vga etc) bliking alternaty.
i disabled ibernate a suspend mode
i have last drives and bios
-
hi, sorry for my english.
i have a mb b450m aorus
crucial balistic sport 3000 8x2
ssd crucial mx500 240gb
xfx rx570
psu kolink modular 500w
ryzen 1600af
when i leave it some time (about 2h) without touch it crashes.
no signal comes to monitor.
i see on motherboard the led (ram/cpu/vga etc) bliking alternaty.
i disabled ibernate a suspend mode
i have last drives and bios
Greetings,
Places to start.
Is this a new system?
What OS?
Did you perform a fresh install or migrate the install from another build?
Are you over clocking?
Is your RAM on the QVL for your board?
Have you mem-tested the RAM
Is there a firmware update for your mx500?
https://www.crucial.com/support/ssd-support/mx500-support
Try and earlier or later version of your video driver
https://www.amd.com/en/support
-
blinking red means pwr stability issues
your Kolink is a real 444W psu (not 500w) and that can be a problem depending on its component quality
-
hi, sorry for my english.
i have a mb b450m aorus
crucial balistic sport 3000 8x2
ssd crucial mx500 240gb
xfx rx570
psu kolink modular 500w
ryzen 1600af
when i leave it some time (about 2h) without touch it crashes.
no signal comes to monitor.
i see on motherboard the led (ram/cpu/vga etc) bliking alternaty.
i disabled ibernate a suspend mode
i have last drives and bios
Greetings,
Places to start.
Is this a new system? yes
What OS? Win 10pro 64bit
Did you perform a fresh install or migrate the install from another build? fresh
Are you over clocking? i set IPM
Is your RAM on the QVL for your board? NO
Have you mem-tested the RAM? yes it passed
Is there a firmware update for your mx500? yes
https://www.crucial.com/support/ssd-support/mx500-support
Try and earlier or later version of your video driver
https://www.amd.com/en/support yes
-
blinking red means pwr stability issues
your Kolink is a real 444W psu (not 500w) and that can be a problem depending on its component quality
it shoud have good components, i read that
https://www.youtube.com/watch?v=NrSPnGulSEs&feature=youtu.be&fbclid=IwAR2JqCFMxGSr-8s8ltj8jS7tJ6kiuPe_xaQH02_OHvk8a8pHAnGwXXCa2Ok
-
provided there is absolutely nothing oc'ed and all @default/auto settings in bios? disable IPM - tested this?
CPU/GPU load temperatures are all in range?
if still problems try another PSU and see how it goes...
-
provided there is absolutely nothing oc'ed and all @default/auto settings in bios? disable IPM - tested this?
CPU/GPU load temperatures are all in range?
if still problems try another PSU and see how it goes...
ok.
temperture:
-the problem appear when i don't make nothing.
however the temp in game for example are 61/67 for cpu and 78 for gpu