Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: static69 on June 25, 2013, 10:33:07 pm

Title: GA-990FXA-UD3 Won't Enter Bios after Switching to RAID
Post by: static69 on June 25, 2013, 10:33:07 pm

Not sure whats going on, but after I switched over to RAID and created a RAID0 array with two 250GB Seagate drives, I have been unable to get back in to the bios. I have tried F1, F2, Del, ESC and nothing ,but I can enter boot menu and choose my stripe array and boot fine. But when I try to enter setup from the boot menu, it goes to a black screen and stays there until I reset it.

Everything else seems to be running great, I got win7 ultimate 64 on without much of a hitch, just choosing boot drive at every boot. I did reset bios and Flash to FC after this happened the first time and after loading Optimized, the only setting I changed was setting SATA to RAID.   

appreciate any ideas and maybe another way to get into setup.

Thanks in advance.
Rob


- ga-990fxa-ud3 REV.3 w/ latest Bios FC

- 2x4GB Ripjaws X DDR-1600

- AMD FX-6300

- Thermaltake TR2 600W

- GeForce 8800GTS

Title: Re: GA-990FXA-UD3 Won't Enter Bios after Switching to RAID
Post by: autotech on June 25, 2013, 10:55:46 pm

When you flashed bios did you make sure to clear dmi ?