Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Sol1960 on October 31, 2012, 01:53:35 am

Title: Setting up raid 0 on GA-Z68X-UD3-B3
Post by: Sol1960 on October 31, 2012, 01:53:35 am

Hi, the questions i have, to setup raid 0 on the board do i use the 2 Gsata ports Grey or the 2 white sata ports, and are the raid drivers already installed.
also is there any other tips i need.

Many thanks, Sol

Title: Re: Setting up raid 0 on GA-Z68X-UD3-B3
Post by: absic on October 31, 2012, 06:37:47 am

Hi Sol,

I would use the two white SATA ports if possible. If you are going to install Windows 7 ( I'm not sure about Vista or Windows 8 ) then I know you won't need to add any drivers during the install process but you will need to add them using F6 for Windows XP.

Make sure the drives are the same make and capacity to avoid any possible problems.

Title: Re: Setting up raid 0 on GA-Z68X-UD3-B3
Post by: Sol1960 on October 31, 2012, 07:39:37 am

Absic, many thanks, that was my gut feeling. And i am going to get exactly the same drive,and to a fresh install also

Regards, Sol