Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Mefisto on November 06, 2012, 07:19:40 pm
-
I just bought this mobo to run my 960t and the issue im having is that the fsb change randomly (apparently).
I have been monitoring this with cpu-z while playing or navigating.
The fsb fluctuates betwen 50-230.
This happens only when i set LLC to auto or extreme.
Is my mobo failing? bad readings or else?
Thanks
PD:im from chile so sorry for my english :B
-
Is the fsb manually set to 200 and/or are the cores unlocked ?
If the bios is up to date try reflashing it or try an older version.
-
Ive tried with fsb set to 200 and auto, no core unlock.
Bios is up to date and ive tried with olders version alrdy.
-
Ive tried with fsb set to 200 and auto, no core unlock.
Bios is up to date and ive tried with olders version alrdy.
Check the pins on the cpu or try another cpu if possible.
Did you manually reset the mobo and load optimized defaults, after the mobo install and bios updates ?
Is microsoft .net 4.0 installed and up to date ?
-
yes, manual reset.
MS .net 4.0 mmm i dont know, how do i check that?
I dont have another processor to test :( .
-
If you have it you'll see it listed in Programs and Features as 'MS framework 4 profile'.
The shop you bought the board at should have no problems with testing it for you.
gl :)
-
the shops over here are not too good in aftersales >:( .
ill try to get another procesor and test my self.