Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Marko on December 11, 2012, 07:34:57 am

Title: ga-p67a-ud7-b3 beeps, no signal to monitor
Post by: Marko on December 11, 2012, 07:34:57 am

Hello,
I have a problem with ga-p67a-ud7-b3 . It wount boot, just beep 16-17 times and restart itself. I get error code C1, i have tried different memorys, without memory sticks, without VGA card, just PSU, mobo, cpu - still errorcode C1, beep 16-17 times and restart itself. Monitor wont turn on.
Any ideas?

Marko

Title: Re: ga-p67a-ud7-b3 beeps, no signal to monitor
Post by: Marko on January 17, 2013, 09:05:14 pm

Nobody dont have any ideas?

Title: Re: ga-p67a-ud7-b3 beeps, no signal to monitor
Post by: stevebris on March 01, 2013, 08:40:14 pm

Quote from: Marko on January 17, 2013, 09:05:14 pm

Nobody dont have any ideas?

Have you cleared the CMOS and updated the bios?

Title: Re: ga-p67a-ud7-b3 beeps, no signal to monitor
Post by: Marko on March 02, 2013, 07:45:00 am

I removed battery and hold it over night, no difference. How could I update the bios, if monitor wont turn on and it restarts itself ?

Title: Re: ga-p67a-ud7-b3 beeps, no signal to monitor
Post by: absic on March 02, 2013, 08:26:27 am

What CPU, GPU, RAM, PSU and other parts are you trying to use?

Is this a new build or have you had the board running previously?