Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: dskiller on December 11, 2012, 10:58:52 am

Title: to increase BCLK or not increase...
Post by: dskiller on December 11, 2012, 10:58:52 am

so its ok to turn BCLK to 103mhz?

the reason I ask because gigabyte software quickboost is doing it


I have a 2600 (non k) and I tried to use number 3 but it put my cpu passed 4ghz and the bclk at 103mhz and the system bsod.

if I put the bclk at 102. the system works fine.

some more info

first time I used the software it was an older version when I had windows 7 installed. it did not change the bclk,but still boosted the cpu to 4ghz

today I was messing with clocks and system refused to post , so I had to clear the cmos.

so I had to use the software to reboost the system
I am using windows 8 now and older software wont work on it. so I have no choice to use the newer software and now changes the bclk clock

Title: Re: to increase BCLK or not increase...
Post by: Dark Mantis on December 11, 2012, 02:52:25 pm

Hi

I suspect that is why you are getting the BSODs. It is probably just the usual story of pushing it a bit too far. Sounds like the software needs a patch.