Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: oliverbeckham on December 12, 2012, 11:33:42 am

Title: GA-890GPA-UD3H (Ver 2.1) - BOUGHT 2 TYPES OF RAM PLEASE ADVISE EXPERTS!
Post by: oliverbeckham on December 12, 2012, 11:33:42 am: I recently bought 2x 2gb BALLISTIX TACTICAL 1600mhz CL8 1.5v the 1st lot i ever bought was made in USA - PART NO. BLT2G3D1608DT1TXO.8FM this has worked perfect for a while now running it at 1333mhz CL7, it says the TRFC for Dimm is 160ns and run perfect in all slots?

I just got delivered today 2x 2gb of the same modules made in CHINA - PART NO. BLT2G3D1608DT1TX0.CEU but on my bios setup i looked and they say TRFC for Dimm is 110ns, however when i set them manually they seem to run fine in the 1st and 3rd slot at 160ns but not in the 2nd and 4th?

Can you advise me please?
Title: Re: GA-890GPA-UD3H (Ver 2.1) - BOUGHT 2 TYPES OF RAM PLEASE ADVISE EXPERTS!
Post by: autotech on December 13, 2012, 05:32:54 am: If you are planning on using all four sticks run them at 160 and unganged. Keep the timings at the lowest rated set for stability. It wouldnt be a problem with motherboard anyway it is usually the amd controller that causes different ram problems in different slots.

For maximum stability they should of been bought as a kit of 4 sticks of 2 gigs each. That is what amd and gigabyte recommend.
Title: Re: GA-890GPA-UD3H (Ver 2.1) - BOUGHT 2 TYPES OF RAM PLEASE ADVISE EXPERTS!
Post by: Vezina on December 13, 2012, 11:48:05 am: Don t mix RAM with such different specs.The tRFC is an important timing ,you may notice random slow downs during usage with such combination.