Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: nemesis on December 14, 2012, 04:25:53 am
-
Hello, I've bought this mb today and i cant even reach the BIOS screen, nothing is shown in my monitor.. I tried all, all power supply wires is connected in the right socket... but no image in my monitor. My serial number starts SN1206... could be i have a defective motherboard? I tried to connect my display from ATI GPU, NVIDIA and HDMI onboard but none.
Specifications:
- i7-3770
- 2x G.SKILL 4GB F3-12800CL9D-8GBXL (tried only 1 module and 1x ExceleRAM 2GB E30100A)
- PowerSupply 500W
- Default Intel fan and master cooler tried also
Could be caused by incompatible RAM modules or a poor 500W(i think 500W is enough without a graphic card, isnt it?)? Should i send back my mb?
Thank you and sorry for my bad english..
-
the bios may need updating for the cpu stepping. the bios version will be on a sticker on the board, usually on a pci slot. compare that against the boards cpu compatibility list on the gigabyte site
-
Had the same problem with the kid's new build over xmas which he spec'd using the GA-Z68AP-D3 and i5-3570K. BIOS vers nowhere to be found on the mb but using the s/n it was built week 6 2012. From the gigabyte site the rev 2.0 BIOS version for that time was FB which doesn't support the Ivy Bridge processor - decided to go with the Asus P8Z77-V LX instead.