Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: Legtom on December 19, 2012, 01:49:31 pm

Title: GA-880GMA-USB3 Trouble with usb 3.0
Post by: Legtom on December 19, 2012, 01:49:31 pm

Hi all,

I have problem with install usb 3.0 (etron 168)  drivers on windows 7x64 (windows8 x64). Windows have problem with drivers (a try 0.98 -> 0.115)  This device cannot start. (Code 10) i have mobo 11 months and i dont know what i can do with this problem. I try all bios (f2,F3,f4e) and still not work .


Thanks in advance.

 

Title: Re: GA-880GMA-USB3 Trouble with usb 3.0
Post by: autotech on December 22, 2012, 03:26:07 am

Just searching the forums i came across a post by Darkmantis so to QUOTE him  "There are obviously  a few posts on the forum here complaining of USB3 issues as you would expect but no more than would be normal for any other component. Also it is still in it's infancy and so some problems are going to need to be ironed out along the way. The only thing that I can say I have noticed with this chip is that it is very fussy when it comes to updates and you MUST remove all traces of the previous drivers before updating them. We usually advise using something like Driver Sweeper to do this."  END QUOTE