Official GIGABYTE Forum

Questions about GIGABYTE products => Graphic cards => Topic started by: darthpingoo on January 07, 2013, 10:40:52 am

Title: Gigabyte GV-R797TO-3GD BIOS update F62 not working for Rev.1.0 PCB
Post by: darthpingoo on January 07, 2013, 10:40:52 am

A new BIOS update F62 has been done for the GV-R797TO-3GB graphics card.

But it's only for the PCB ver 2.1 (I think you should write it on the website).

Can you provide a BIOS with the new features (UEFI BIOS + new FAN curve profile e.g. 25% Fan Speed @ Idle) for those who have the PCB ver 1.0?

These UEFI BIOS is pretty important in order to activate Windows 8 Secure Boot.

I've contacted the support, but it responded me with a very bad french and something like "wait & see what will happened".

Title: Re: Gigabyte GV-R797TO-3GD BIOS update F62 not working for Rev.1.0 PCB
Post by: ccj2740 on January 06, 2014, 08:43:37 pm

I was hoping the same thing since the F62 update gives huge performance in cgminer..

But I have a Rev.1 and the F62 is not working for this card...

Would be nice if you can help me out please ?

Title: Re: Gigabyte GV-R797TO-3GD BIOS update F62 not working for Rev.1.0 PCB
Post by: Nelly on January 14, 2014, 01:09:59 pm

Contact Gigabyte:  http://ggts.gigabyte.com/

Explain what you have here.  :)