Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Liam on March 09, 2013, 12:57:28 am

Title: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: Liam on March 09, 2013, 12:57:28 am

Hi all,

Built my new system yesterday and today I tried to change the on-board graphics to 128M from 64M. PC just keeps resetting when it reaches the Windows splash screen (Doesn't even display)

Here's my system ;

Windows 7 64bit
Gigabyte Z77M-D3H
i5 3750k @ 3.8Ghz (Turbo)
8GB RAM
SSD

Installed the latest drivers and updated to the latest BIOS (I've also tried an older BIOS)

Would appreciate any help given

Thanks,

Liam :)

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: dmdilks on March 09, 2013, 05:11:14 am

When you change the memory are setting both these or just the internal graphics memory.

Internal Graphics Memory Size
 
DVMT Total Memory Size

If you have set the DVMT try putting back the default setting and that is max.

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: Liam on March 09, 2013, 09:48:49 am

Thanks for the reply.

I've tried both options but does the same. PC is just about the get the Windows splash screen then it reboots.

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: absic on March 09, 2013, 10:39:17 am

Could be a BIOS issue. What version are you running? If it is not the latest version try updating to that and see if that helps at all.

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: Liam on March 09, 2013, 10:54:17 am

Thanks for the reply. Running f14g.

It's an odd one, can't work it out nor can I find anything about it.

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: Liam on March 09, 2013, 10:34:22 pm

Anyone else shed some light on this please?

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: dmdilks on March 10, 2013, 02:13:26 am

Just asking did you set the on board graphics to be the 1st one and not auto.

Plus I have been doing some reading it sound like you can't change that setting.

By what I'm reading is that you can only set it to the min setting and not the max.

Try running the DxDiag and see what that has to say. After you might see something like this.

Card name: Intel(R) HD Graphics Family
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_0106&SUBSYS_FCE01179&REV_09
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: Liam on March 10, 2013, 08:26:24 am

Thanks mate. I'll give this a go later when I finish work and post my results!

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: Liam on March 10, 2013, 09:07:45 am

This is what I got ;

Card name: Intel(R) HD Graphics 4000
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Key: Enum\PCI\VEN_8086&DEV_0162&SUBSYS_D0001458&REV_09
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB

Title: Re: Gigabyte Z77M-D3H On-board Graphics - Can't raise to above 64M?
Post by: dmdilks on March 10, 2013, 05:36:32 pm

Quote from: Liam on March 10, 2013, 09:07:45 am

Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB

It is showing you that you can use up 1696 mb of memory. 1632 mb system + 64 mb from the bios setting = 1696 mb. So like i said that you can't change that setting in the bios sorry.