Official GIGABYTE Forum
Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: Mmoti6 on March 16, 2013, 07:08:23 am
-
Hi
I have the P55A-UD4P whit 2 hdd of 1Tb (=2Tb)
With sata
I plug them to sata2_0 & sata2_1
In the bios the IDE is on and the sata like native is on
But still the mhdd don't recognize the hdd
(http://puu.sh/2ix53)
What I do wrong ?
And I have memory cards DDR3 1333 of 4gb (2x2)
I want to add more 8gb (4x2)
I want to buy Kingston
KVR1333D3N9/8G
This ok?
-
Go to Standard CMOS Features. What is showing on the screen. Is it set to Auto in there to detect the drives.
Go to Advanced BIOS Features. Look in Hard Disk Boot Priority to see if they are showing up in there.
One other thing what are the HD sata 2 / 3gb or sata 3 / 6gb ?
If you unplug them and plug in another HD with the same cable do they show up ?
-
Go to Standard CMOS Features. What is showing on the screen. Is it set to Auto in there to detect the drives.
(http://puu.sh/2iDlE)
(http://puu.sh/2iDmv)
(http://puu.sh/2iDmV)
Go to Advanced BIOS Features. Look in Hard Disk Boot Priority to see if they are showing up in there.
(http://puu.sh/2iDnH)
One other thing what are the HD sata 2 / 3gb or sata 3 / 6gb ?
Sata 2 / 3gb
If you unplug them and plug in another HD with the same cable do they show up ?
I don't have another Hd
You think Kingston KVR1333D3N9/4G is ok?
Tnx!
-
So there are showing up and what other problems are you having if any ?
-
The mhdd don't see them
(http://puu.sh/2ix53)
-
Why are running the MHDD on the hard drives ? Here is a link to somebody that might be able to help
http://hddguru.com/software/2005.10.02-MHDD/mhdd_manual.en.html#firstrun
-
Soory I don't get it
What I do wrong?
And what you say about KVR1333D3N9/4G is ok?