Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: pzkpfw-iv7 on April 26, 2013, 05:23:05 pm

Title: Gigabyte z77x-ud3h
Post by: pzkpfw-iv7 on April 26, 2013, 05:23:05 pm

Hi today I installed the Z77X-UD3H mobo and I can see the debug led error A0 according to the manual that error says "IDE initialization is started" is a hardware or driver problem or is all right?? ???

Title: Re: Gigabyte z77x-ud3h
Post by: absic on April 26, 2013, 07:19:56 pm

Not running your mobo but I am running the GA-Z77X-UP5TH and on my board, A0 on the debug LED is lit when everything is running OK.

Title: Re: Gigabyte z77x-ud3h
Post by: pzkpfw-iv7 on April 27, 2013, 12:55:05 pm

Now I have another problem could not enter the BIOS setup by pressing delete did a cmos reset load optimized defaults and reboot and still cant go to setup bios whats wrong???

Title: Re: Gigabyte z77x-ud3h
Post by: absic on April 27, 2013, 01:33:09 pm

What keyboard are you using?

How is your keyboard connected to the PC?

Title: Re: Gigabyte z77x-ud3h
Post by: pzkpfw-iv7 on April 27, 2013, 05:09:19 pm

is strange because F9 info END q-flash and F12 BOOT works i can enter to bios setup with F12 boot menu so strange but all works good well i think no more problems

Title: Re: Gigabyte z77x-ud3h
Post by: pzkpfw-iv7 on April 27, 2013, 10:55:31 pm

solved "Supr" is the key now to enter setup bios dunno why change thx for ur help