Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: PRG on May 04, 2013, 04:58:46 am

Title: Locked 2600k on a z68xp-ud4?
Post by: PRG on May 04, 2013, 04:58:46 am
I've had this board and processor for well over a year now. I set it back to stock clocks a while to diagnose another problem. The processor is an i7-2600k and the board is a z68xp-ud4 runing bios u1g. In bios, I cannot any clocking or voltage related settings, with the exception of enable/disable turbo boost and XMP profile.  The board says it has a 2600k in it, which it does. I had no OC related utilities installed past monitoring ones, (HWinfo 64 and CPU-Z.) I installed Intel XTU after I noticed this issue. XTU has me locked out of making changes despite it also saying it's a 2600k. Kind of at a loss here.   
Title: Re: Locked 2600k on a z68xp-ud4?
Post by: Gloup_Gloup on May 29, 2013, 01:40:37 am
Hi,  ;) Welcome to the forum...

 What is a version of moterboard?

GA-Z68XP-UD4 (rev. 1.0)
http://www.gigabyte.fr/products/product-page.aspx?pid=3910#manual


GA-Z68XP-UD4 (rev. 1.3)
http://www.gigabyte.fr/products/product-page.aspx?pid=3977#manual

how do I distinguish between the different revisions or version...
http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=864

Have you read a manual guide page 38 and plus...?

He exist a bios U1L(UEFI BIOS)...

Have you tried bios F6 ?

Always use Q-Flash utility, not other.

Check infos...
More fully describe your hardware, like SSD, Ram, Psu...

Best regards.