Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: dirtybirdy on June 07, 2013, 11:48:23 pm

Title: Z87X-OC BIOS F4 problem with Vertex 3 SSD
Post by: dirtybirdy on June 07, 2013, 11:48:23 pm: As on topic , on old F3 bios my SSD works full speed :
--------------------------------------------------
CrystalDiskMark 2.2 (C) 2007-2008 hiyohiyo
   Crystal Dew World : http://crystalmark.info/
--------------------------------------------------

   Sequential Read : 516.625 MB/s
  Sequential Write : 163.789 MB/s
Random Read 512KB : 457.802 MB/s
Random Write 512KB : 152.722 MB/s
   Random Read 4KB : 32.213 MB/s
  Random Write 4KB : 132.208 MB/s

   Test Size : 100 MB
   Date : 2013/06/07 23:46:22

With F4 ... cut it to 50 % ( i back to old bios so cant post results atm )
Beside that is any chance to Gigabyte add suport full HD resolution on BIOS ? As is works only on internal Haswell graphic atm.... When i set on my main graphich card (PCIE 1 ) graphic is ridiculous ...

Best Regards

p.s.

System dont boot on my mb if i connect fan to FAN2 slot ... no clue why .. any help ? no mather fan ,, i connected like 4 different
Title: Re: BIOS F4 problem with Vertex 3 SSD
Post by: dirtybirdy on June 07, 2013, 11:49:35 pm: another problems with F4

system dont boot in AHCI mode ... only boot in RAID mode ( the same HDD setup )
Title: Re: BIOS F4 problem with Vertex 3 SSD
Post by: Livert on June 08, 2013, 06:16:05 am: I have the same problem with my Patriot inferno120GB SSD. Had to buy a Samsung 250GB SSD for it to work in AHCI mode.
Title: Re: BIOS F4 problem with Vertex 3 SSD
Post by: dirtybirdy on June 08, 2013, 01:34:32 pm: i forgot to add to all this is on Gigabyte Z87X-OC , and the funny thing is to OC version first bios missing ...OC settings ( which are in next bios ) ::)
Title: Re: BIOS F4 problem with Vertex 3 SSD
Post by: dirtybirdy on June 09, 2013, 03:41:47 am: My fulll setup ( justo Gigabyte team know) :

SATA ports :

1 : OCZ Revodrive 3 SSD
2: WDC 500 Gb
3/4 : Seagate 250 Gb ( raid 0 set)
4 : iHAS124
Title: Re: Z87X-OC BIOS F4 problem with Vertex 3 SSD
Post by: runn3R on June 12, 2013, 06:22:50 pm: Hi

As it seems other forum users haven't experienced this problem therefore please kindly report it to our technical support team under
http://ggts.gigabyte.com

When solved please let us know the outcome, thanks
Title: Re: Z87X-OC BIOS F4 problem with Vertex 3 SSD
Post by: dirtybirdy on June 13, 2013, 03:34:00 am: hello
I will let you know tomorrow , need go back to F4 bios then + make screenies / test on my SSD again
Thanks for answer

Regards
Title: Re: Z87X-OC BIOS F4 problem with Vertex 3 SSD
Post by: dirtybirdy on June 13, 2013, 01:40:38 pm: Hello again
I have been update Bios to F4 again , and ... SSD work properly now so no clue whats is going on .
Maybe on first flashing bios was corrupted i dont know . Anyway now my SSD works correctly .

Greetings
Title: Re: Z87X-OC BIOS F4 problem with Vertex 3 SSD
Post by: Gloup_Gloup on June 13, 2013, 01:58:18 pm: It's good to see that the situation is better. This is encouraging for other users.
Title: Re: Z87X-OC BIOS F4 problem with Vertex 3 SSD
Post by: dirtybirdy on June 13, 2013, 09:07:01 pm: the only problems which i have atm is to still connect any Fan to SYS_AN 2 slot = system dont boot + fan not working at all :-\
and the display Bios on my GTX 580 and 28 '' full hd monitor i get like small window with BIOS main window with huge black borders around it thats all , when i try use adjust resolution hot key i get info " 1920x1058 resolution is not supported atm" .The bios display properly only on internal intel graphic card .