Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with AMD processors => Topic started by: sonra on July 10, 2013, 06:29:26 pm

Title: GA-F2A75M-D3H problem
Post by: sonra on July 10, 2013, 06:29:26 pm

Hello all
I got today a  new computer with this mother board
I try to connect a VGA display and  i notice that after power up  the display begin to work and after few  second it get disconnected and i can not see the
bios setting . I try to connect in parallel a HDMI display and  both displays  show the bios screen . How can  I  change the setting  that the VGA ill work alone?
(if it is possible?)

regards ahead Doron

sonra@yahoo.com

Title: Re: GA-F2A75M-D3H problem
Post by: Vezina on July 10, 2013, 09:51:48 pm

Post more info about the system.What version is the motherboard and what BIOS version you use.

I am having the exact board ,version 1.1 ,with a 5600K and i can tell that apart from the LLC settings the board seems ok.
Nice overclocking done easily.
Using the VGA output with an LG LCD LED.

Never had issues using BIOS.

I would say the problem is the display used.

Use BIOS version F5 with 1.0 and 1.1 hardware versions.

Title: Re: GA-F2A75M-D3H problem
Post by: sonra on July 11, 2013, 12:10:18 pm

hi
Thanks for response I have F4 bios rev.   I don't know how to get hardware version
regards
Doron

Title: Re: GA-F2A75M-D3H problem
Post by: sonra on July 11, 2013, 02:46:13 pm

Hi
Try to up date to rev F5 with the some result . The problem is ehem iI try to go in BIOS setup ( press DEL  during powerup )
Doron