Official GIGABYTE Forum

Questions about GIGABYTE products => Motherboards with Intel processors => Topic started by: gommh on July 27, 2013, 08:54:21 am

Title: POST error
Post by: gommh on July 27, 2013, 08:54:21 am

Recently, I've been building a new PC, and I finally managed to get it together. The moment I switched it on however, it started correctly before promptly giving two short POST beeps. No signal is outputted to the screen, and it restarts after a few seconds before continuing ad infinitum. I've tried resetting the CMOS as well as replacing the battery, to no avail. I have put the RAM in all possible slots, with no real effect. I have tried re-cabling it, but nothing is really working.
I'll post the specs, and I'm trying desperately not to have to RMA the motherboard.

MoBo - GA-Z77-D3H
CPU - Intel i7 3770
GPU - Gigabyte GTX 660
RAM - 1x 4GB DDR3 stick
PSU - Sumvision 800W

Thanks in advance!

Title: Re: POST error
Post by: dmdilks on July 27, 2013, 03:08:43 pm

Have you tried it outside of the case? On the box that it came in.

Title: Re: POST error
Post by: ex58 on July 27, 2013, 03:50:02 pm

Your 1 stick of RAM can do problem,how sure you are that is OK?
Video output connect to board itself (do not insert your GTX 660, atm).
Check for bent pins in CPU socket.

Title: Re: POST error
Post by: gommh on July 28, 2013, 04:04:16 pm

Absolute life-saver!  :D
I checked the socket, and a couple of pins were bent [noise turned out to be the optical drive].
Being of unfit countenance to repair these, I have ordered a replacement :/
Either way, thank you so much!